Global Fastening Customization Solutions Cyflenwr

Croeso i AYA | Llyfrnodwch y dudalen hon | Rhif ffôn swyddogol: 311-6603-1296

facebook trydar yn gysylltiedig instagram youtube pinterest
English
tudalen_baner

Cynhyrchion

Bolltau Cap Pen Soced Dur Di-staen Delwedd dan Sylw
  • Bolltau Cap Pen Soced Dur Di-staen
  • Bolltau Cap Pen Soced Dur Di-staen

Bolltau Cap Pen Soced Dur Di-staen

Trosolwg:

Nwyddau: Bolltau Pen Allen Dur Di-staen
Deunydd: Wedi'i wneud o 316 o ddur di-staen, mae gan y sgriwiau hyn wrthwynebiad cemegol da a gallant fod yn magnetig ysgafn. Fe'u gelwir hefyd yn ddur di-staen A2.
Math o Ben: Pen Soced.
Hyd: yn cael ei fesur o dan y pen.
Gelwir sgriwiau metrig hefyd yn sgriwiau dur di-staen A2.
Math o Thread: Thread Bras, Thread Fine. Edau bras yw safon y diwydiant; dewiswch y sgriwiau hyn os nad ydych chi'n gwybod y traw neu'r edafedd fesul modfedd. Mae bylchau agos rhwng edafedd mân ac all-fain i atal llacio rhag dirgryniad; po fwyaf yw'r edau, y gorau yw'r gwrthiant.
Safon: Mae sgriwiau sy'n bodloni ASME B1.1, ASME B18.3, ISO 21269, ac ISO 4762 (DIN 912 gynt) yn cydymffurfio â safonau ar gyfer dimensiynau. Mae sgriwiau sy'n bodloni ASTM B456 ac ASTM F837 yn cydymffurfio â safonau ar gyfer deunyddiau.


Manylebau

Tabl Dimensiwn

Pam AYA

Disgrifiad o'r Cynnyrch

Enw Cynnyrch Bolltau Pen Allen Dur Di-staen
Deunydd Wedi'u gwneud o 316 o ddur di-staen, mae gan y sgriwiau hyn wrthwynebiad cemegol da a gallant fod ychydig yn magnetig. Fe'u gelwir hefyd yn ddur di-staen A2.
Math Pen Pen Soced
Hyd Yn cael ei fesur o dan y pen
Math Edau Thread Bras, Thread Gain. Edau bras yw safon y diwydiant; dewiswch y sgriwiau hyn os nad ydych chi'n gwybod y traw neu'r edafedd fesul modfedd. Mae bylchau agos rhwng edafedd mân ac all-fain i atal llacio rhag dirgryniad; po fwyaf yw'r edau, y gorau yw'r gwrthiant.
Safonol Mae sgriwiau sy'n cwrdd â manylebau ASME B18.2.1 neu fanylebau DIN 933 gynt yn cydymffurfio â'r safonau dimensiwn hyn.
  • Pâr o:
  • Nesaf:

    • Dur di-staen Allen Head Bolts-tabled dimensiwn

    ISO 21269

    ASME B18.3

    Maint 0# 1# 2# 3# 4# 5# 6# 8# 10# 12# 1/4 5/16
    d Diamedr Sgriw 0.06 0.073 0.086 0. 099 0. 112 0. 125 0. 138 0. 164 0.19 0.216 0.25 0. 3125
    PP UNC - 64 56 48 40 40 32 32 24 24 20 18
    UNF 80 72 64 56 48 44 40 36 32 28 28 24
    UNEF - - - - - - - - - 32 32 32
    ds uchafswm = maint enwol 0.06 0.073 0.086 0. 099 0. 112 0. 125 0. 138 0. 164 0.19 0.216 0.25 0. 3125
    min 0.0568 0. 0695 0.0822 0. 0949 0. 1075 0. 1202 0. 1329 0. 1585 0. 184 0. 2095 0. 2435 0. 3053
    dk max 0.096 0. 118 0.14 0. 161 0. 183 0. 205 0.226 0.27 0. 312 0. 324 0. 375 0.469
    min 0. 091 0. 112 0. 134 0. 154 0. 176 0. 198 0.216 0.257 0.298 0. 314 0. 354 0. 446
    k max 0.06 0.073 0.086 0. 099 0. 112 0. 125 0. 138 0. 164 0.19 0.216 0.25 0. 312
    min 0.057 0.07 0.083 0. 095 0. 108 0. 121 0. 134 0. 159 0. 185 0.21 0.244 0. 306
    s Maint Enwol 0.05 0.062 0.078 0.078 0.094 0.094 0. 109 0. 141 0. 156 0. 156 0. 188 0.25
    t min 0.025 0.031 0.038 0.044 0.051 0.057 0.064 0.077 0.09 0. 103 0.12 0. 151
    b min 0.5 0.62 0.62 0.62 0.75 0.75 0.75 0.88 0.88 0.88 1 1.12
    c chamfer neu radiws 0.004 0.005 0.008 0.008 0.009 0.012 0.013 0.014 0.018 0.022 0.025 0.033
    r chamfer neu radiws 0.007 0.007 0.007 0.007 0.008 0.008 0.008 0.008 0.008 0.01 0.01 0.01
    w min 0.02 0.025 0.029 0.034 0.038 0. 043 0. 047 0.056 0. 065 0.082 0. 095 0. 119
    Maint 3/8 7/16 1/2 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2
    d Diamedr Sgriw 0. 375 0. 4375 0.5 0. 5625 0.625 0.75 0.875 1 1.125 1.25 1.375 1.5
    PP UNC 16 14 13 12 11 10 9 8 7 7 6 6
    UNF 24 20 20 18 18 16 14 12 12 12 12 12
    UNEF 32 28 28 24 24 20 20 20 18 18 18 18
    ds uchafswm = maint enwol 0. 375 0. 4375 0.5 0. 5625 0.625 0.75 0.875 1 1.125 1.25 1.375 1.5
    min 0. 3678 0.4294 0.4919 0.5538 0. 6163 0. 7406 0. 8647 0. 9886 1. 1086 1.2336 1.3568 1.4818
    dk max 0. 562 0.656 0.75 0.843 0. 938 1.125 1.312 1.5 1.688 1.875 2. 062 2.25
    min 0.54 0.631 0.725 0.827 0. 914 1.094 1.291 1.476 1.665 1.852 2. 038 2.224
    k max 0. 375 0. 438 0.5 0. 562 0.625 0.75 0.875 1 1.125 1.25 1.375 1.5
    min 0. 368 0.43 0. 492 0.554 0.616 0.74 0.864 0. 988 1.111 1.236 1.36 1.485
    s Maint Enwol 0. 312 0. 375 0. 375 0. 437 0.5 0.625 0.75 0.75 0.875 0.875 1 1
    t min 0. 182 0.213 0.245 0.276 0. 307 0.37 0. 432 0. 495 0. 557 0.62 0.682 0. 745
    b min 1.25 1.38 1.5 1.5 1.75 2 2.25 2.5 2.81 3.12 3.44 3.75
    c chamfer neu radiws 0.04 0. 047 0.055 0.062 0.07 0.085 0.1 0. 114 0. 129 0. 144 0.16 0. 176
    r chamfer neu radiws 0.01 0.015 0.015 0.015 0.015 0.015 0.02 0.02 0.02 0.02 0.02 0.02
    w min 0. 143 0. 166 0.19 0.214 0.238 0.285 0. 333 0.38 0. 428 0.475 0.523 0.57

     

    Maint 1-3/4 2 2-1/4 2-1/2 2-3/4 3 3-1/4 3-1/2 3-3/4 4
    d Diamedr Sgriw 1.75 2 2.25 2.5 2.75 3 3.25 3.5 3.75 4
    PP UNC 5 4.5 4.5 4 4 4 4 4 4 4
    UNF - - - - - - - - - -
    UNEF - - - - - - - - - -
    ds uchafswm = maint enwol 1.75 2 2.25 2.5 2.75 3 3.25 3.5 3.75 4
    min 1. 7295 1.978 2.228 2. 4762 2. 7262 2. 9762 3. 2262 3. 4762 3. 7262 3. 9762
    dk max 2.625 3 3.375 3.75 4.125 4.5 4.875 5.25 5.625 6
    min 2. 597 2.97 3. 344 3.717 4.09 4.464 4.837 5.211 5.584 5. 958
    k max 1.75 2 2.25 2.5 2.75 3 3.25 3.5 3.75 4
    min 1.734 1.983 2.232 2.481 2.73 2. 979 3.228 3.478 3.727 3. 976
    s Maint Enwol 1.25 1.5 1.75 1.75 2 2.25 2.25 2.75 2.75 3
    t min 0.87 0. 995 1.12 1.245 1.37 1.495 1.62 1.745 1.87 1.995
    b min 4.38 5 5.62 6.25 6.88 7.5 8.12 8.75 9.38 10
    c chamfer neu radiws 0. 207 0.238 0.269 0.3 0. 332 0. 363 0. 394 0. 426 0. 458 0.489
    r chamfer neu radiws 0.02 0.02 0.036 0.036 0.036 0.036 0.036 0.036 0.036 0.036
    w min 0.665 0.76 0.855 0.95 1.045 1.14 1.235 1.33 1.425 1.52
    Thread Sgriw M8 M10 M12 M14 M16 M20 M24 M30 M36 M42 M48 M56 M64
    d
    P Cae edau gain -1 1 1.25 1.5 1.5 1.5 2 2 2 3 3 3 4 4
    Edau mân -2 / 1 1.25 / / 1.5 / / / / / / /
    dk max Am bennau plaen 13 16 18 21 24 30 36 45 54 63 72 84 96
    Am bennau crychlyd 13.27 16.27 18.27 21.33 24.33 30.33 36.39 45.39 54.46 63.46 72.46 84.54 96.54
    min 12.73 15.73 17.73 20.67 23.67 29.67 35.61 44.61 53.54 62.54 71.54 83.46 95.46
    ds max 8 10 12 14 16 20 24 30 36 42 48 56 64
    min 7.78 9.78 11.73 13.73 15.73 19.67 23.67 29.67 35.61 41.61 47.61 55.54 63.54
    k max 8 10 12 14 16 20 24 30 36 42 48 56 64
    min 7.64 9.64 11.57 13.57 15.57 19.48 23.48 29.48 35.38 41.38 47.38 56.26 63.26
    s Maint Enwol 6 8 10 12 14 17 19 22 27 32 36 41 46
    max 6.14 8.175 10.175 12.212 14.212 17.23 19.275 22.275 27.275 32.33 36.33 41.33 46.33
    min 6.02 8.025 10.025 12.032 14.032 17.05 19.065 22.065 27.065 32.08 36.08 41.08 46.08
    t min 4 5 6 7 8 10 12 15.5 19 24 28 34 38

    ISO 4762

    Thread Sgriw M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M12
    d
    P Cae 0.35 0.4 0.45 0.5 0.7 0.8 1 1.25 1.5 1.75
    dk max Am bennau plaen 3 3.8 4.5 5.5 7 8.5 10 13 16 18
    Am bennau crychlyd 3.14 3.98 4.68 5.68 7.22 8.72 10.22 13.27 16.27 18.27
    min 2.86 3.62 4.32 5.32 6.78 8.28 9.78 12.73 15.73 17.73
    da max 2 2.6 3.1 3.6 4.7 5.7 6.8 9.2 11.2 13.7
    ds max 1.6 2 2.5 3 4 5 6 8 10 12
    min 1.46 1.86 2.36 2.86 3.82 4.82 5.82 7.78 9.78 11.73
    e min 1.733 1.733 2. 303 2.873 3.443 4.583 5.723 6.863 9. 149 11.429
    k max 1.6 2 2.5 3 4 5 6 8 10 12
    min 1.46 1.86 2.36 2.86 3.82 4.82 5.7 7.64 9.64 11.57
    s Maint Enwol 1.5 1.5 2 2.5 3 4 5 6 8 10
    max 1.58 1.58 2.08 2.58 3.08 4.095 5.14 6.14 8.175 10.175
    min 1.52 1.52 2.02 2.52 3.02 4.02 5.02 6.02 8.025 10.025
    t min 0.7 1 1.1 1.3 2 2.5 3 4 5 6
    w min 0.55 0.55 0.85 1.15 1.4 1.9 2.3 3.3 4 4.8
    Thread Sgriw (M14) M16 M20 M24 M30 M36 M42 M48 M56 M64
    d
    P Cae 2 2 2.5 3 3.5 4 4.5 5 5.5 6
    dk max Am bennau plaen 21 24 30 36 45 54 63 72 84 96
    Am bennau crychlyd 21.33 24.33 30.33 36.39 45.39 54.46 63.46 72.46 84.54 96.54
    min 20.67 23.67 29.67 35.61 44.61 53.54 62.54 71.54 83.46 95.46
    da max 15.7 17.7 22.4 26.4 33.4 39.4 45.6 52.6 63 71
    ds max 14 16 20 24 30 36 42 48 56 64
    min 13.73 15.73 19.67 23.67 29.67 35.61 41.61 47.61 55.54 63.54
    e min 13.716 15.996 19.437 21.734 25.154 30.854 36.571 41.131 46.831 52.531
    k max 14 16 20 24 30 36 42 48 56 64
    min 13.57 15.57 19.48 23.48 29.48 35.38 41.38 47.38 55.26 63.26
    s Maint Enwol 12 14 17 19 22 27 32 36 41 46
    max 12.212 14.212 17.23 19.275 22.275 27.275 32.33 36.33 41.33 46.33
    min 12.032 14.032 17.05 19.065 22.065 27.065 32.08 36.08 41.08 46.08
    t min 7 8 10 12 15.5 19 24 28 34 38
    w min 5.8 6.8 8.6 10.4 13.1 15.3 16.3 17.5 19 22

    DIN 912

    Thread Sgriw (M14) M16 M20 M24 M30 M36 M42 M48 M56 M64
    d
    P Cae 2 2 2.5 3 3.5 4 4.5 5 5.5 6
    dk max Am bennau plaen 21 24 30 36 45 54 63 72 84 96
    Am bennau crychlyd 21.33 24.33 30.33 36.39 45.39 54.46 63.46 72.46 84.54 96.54
    min 20.67 23.67 29.67 35.61 44.61 53.54 62.54 71.54 83.46 95.46
    da max 15.7 17.7 22.4 26.4 33.4 39.4 45.6 52.6 63 71
    ds max 14 16 20 24 30 36 42 48 56 64
    min 13.73 15.73 19.67 23.67 29.67 35.61 41.61 47.61 55.54 63.54
    e min 13.716 15.996 19.437 21.734 25.154 30.854 36.571 41.131 46.831 52.531
    k max 14 16 20 24 30 36 42 48 56 64
    min 13.57 15.57 19.48 23.48 29.48 35.38 41.38 47.38 55.26 63.26
    s Maint Enwol 12 14 17 19 22 27 32 36 41 46
    max 12.212 14.212 17.23 19.275 22.275 27.275 32.33 36.33 41.33 46.33
    min 12.032 14.032 17.05 19.065 22.065 27.065 32.08 36.08 41.08 46.08
    t min 7 8 10 12 15.5 19 24 28 34 38
    w min 5.8 6.8 8.6 10.4 13.1 15.3 16.3 17.5 19 22
    Thread Sgriw M12 (M14) M16 (M18) M20 (M22) M24 (M27) M30 (M33)
    d
    P Cae Edau bras 1.75 2 2 2.5 2.5 2.5 3 3 3.5 3.5
    Traw edau mân-1 1.25 1.5 1.5 1.5 1.5 1.5 2 2 2 2
    Traw edau mân-2 1.5 - - 2 2 2 - - - -
    dk pen plaen max 18 21 24 27 30 33 36 40 45 50
    pennau knurled max 18.27 21.33 24.33 27.33 30.33 33.39 36.39 40.39 45.39 50.39
    min 17.73 20.67 23.67 26.67 29.67 32.61 35.61 39.61 44.61 49.61
    da max 13.7 15.7 17.7 20.2 22.4 24.4 26.4 30.4 33.4 36.4
    ds max 12 14 16 18 20 22 24 27 30 33
    min 11.73 13.73 15.73 17.73 19.67 21.67 23.67 26.67 29.67 32.61
    e min 11.43 13.72 16 16 19.44 19.44 21.73 21.73 25.15 27.43
    k max 12 14 16 18 20 22 24 27 30 33
    min 11.57 13.57 15.57 17.57 19.48 21.48 23.48 26.48 29.48 32.38
    s Maint Enwol 10 12 14 14 17 17 19 19 22 24
    min 10.025 12.032 14.032 14.032 17.05 17.05 19.065 19.065 22.065 24.065
    max 10.175 12.212 14.212 14.212 17.23 17.23 19.275 19.275 22.275 24.275
    t min 6 7 8 9 10 11 12 13.5 15.5 18
    w min 4.8 5.8 6.8 7.8 8.6 9.4 10.4 11.9 13.1 13.5
    Thread Sgriw M36 M42 M48 M56 M64 M72 M80 M90 M100
    d
    P Cae Edau bras 4 4.5 5 5.5 6 6 6 6 6
    Traw edau mân-1 3 3 3 4 4 4 4 4 4
    Traw edau mân-2 - - - - - - - - -
    dk pen plaen max 54 63 72 84 96 108 120 135 150
    pennau knurled max 54.46 63.46 72.46 84.54 96.54 108.54 120.54 135.63 150.63
    min 53.54 62.54 71.54 83.46 95.46 107.46 119.46 134.37 149.37
    da max 39.4 45.5 52.6 63 71 79 87 97 107
    ds max 36 42 48 56 64 72 80 90 100
    min 35.61 41.61 47.61 55.54 63.54 71.54 79.54 89.46 99.46
    e min 30.85 36.57 41.13 46.83 52.53 62.81 74.21 85.61 97.04
    k max 36 42 48 56 64 72 80 90 100
    min 35.38 41.38 47.38 55.26 63.26 71.26 79.26 89.13 99.13
    s Maint Enwol 27 32 36 41 46 55 65 75 85
    min 27.065 32.08 36.08 41.08 46.08 55.1 65.1 75.1 85.12
    max 27.275 32.33 36.33 41.33 46.33 55.4 65.4 75.4 85.47
    t min 19 24 28 34 38 43 48 54 60
    w min 15.3 16.3 17.5 19 22 25 27 32 34

    01-Arolygiad ansawdd-AYAINOX 02-Cynhyrchion ystod eang-AYAINOX 03-tystysgrif-AYAINOX 04-diwydiant-AYAINOX

    Ysgrifennwch eich neges yma a'i hanfon atom

    cynhyrchion cysylltiedig

    Tarwch enter i chwilio neu ESC i gau